Cross Section Showing Voids


Time Domain Imaging (TDI)™
Utilizes an echo (amplitude & polarity) arrival ‘time’ as a reference, such as standard A-Scan, B-Scan and C-Mode type images.

Cross Section Showing Voids

Ceramic Material Voids and Virtual Cross-Section - Application Note 1203

Cross Section Showing Voids

Sample & Method

One Ceramic Sample. Interface Scan imaging technique utilized. Multiple Q-BAM performed.


Voids (bright spots) were detected within the bulk of the ceramic material. Multiple Q-BAM was performed, allowing for a non-destructive cross-section at three locations on the sample. Depth scales are calculated using the speed of ultrasound within the ceramic.